Replacement pogo pins for Keysight 42941A

[owiecc]

I need to replace a pogo pin that goes on the tip of the Keysight 42941A. Do you have a good distributor of these pins? Pin diameter is 0.67mm and the length is around 15mm (don't know precisely because all the pins I have are broken).

Keysight sells them but I would prefer a cheaper source Keysight 42941-60004

[perdrix]

I ordered a pack of 100 P50-B1 pogo pins from eBay for the grand sum of GBP3.35 (about USD4). ...

See this thread: https://www.eevblog.com/forum/testgear/spring-tips-for-pmk-pml-711-a-or-similar-(e-g-lecroy-pp008)/

David

[owiecc]

Thanks, they do look very similar. Will try them and report back if they fit.