Author Topic: Bench Power Supply - Repair / Schematics - UG-6010DC or Axiomet AX-3003L-3  (Read 769 times)

0 Members and 1 Guest are viewing this topic.

Offline jozamm

  • Newbie
  • Posts: 2
  • Country: mt
Dear all,

I am in process of repairing a bench dual power supply of the type UG-6010DC or AX-3003L-3. (Link : ). These are standard models found in labs, 2 variable output supplies (variable current and voltage) with Master/Slave control and a 3rd 5V fixed output. These models are 30V, 5A per channel and 5C,3A. (Image at the end).

I would appreciate if anyone has the schematic of such model or a similar model to help me in its repair, I believe that there is a standard schematic around with different variations,

Thanks beforehand,


« Last Edit: April 07, 2018, 12:34:22 pm by jozamm »

Offline coromonadalix

  • Super Contributor
  • ***
  • Posts: 2840
  • Country: ca
hum  i think they ressemble some mastech models, there's a few schematics on the web ...  but linears models, if yours is switching as i think it is,  i did not see them or searched them ...
The following users thanked this post: jozamm

Offline oldway

  • Super Contributor
  • ***
  • !
  • Posts: 2174
The following users thanked this post: jozamm

Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo