Electronics > Repair
Resistances measurement indicator on PCB
<< < (4/4)
kraka:

--- Quote from: tooki on November 08, 2024, 04:27:07 pm ---You were asked a bunch of specific questions and you ignored them. We are not clairvoyant.

--- End quote ---

I am sorry , i did not saw this questions. I never ignore somebody who try to help. But as i see, this questions made by 807, not by you.
So my apology goes to 807 not to you. If 807 has a problem with me, I would like to discuss it with him, not with others. If his question is important in solving my problem (and it is) he knows better than anyone else and has both the mind and fluency to express it to me himself. No one is a clairvoyant here, just as no one is an interrogator here.

But this information is no longer useful because the problem has been solved, as I will explain in my next reply.

I would like to thank you for trying to help me.
kraka:
Finally, after a long period of trying, the problem was solved. Although the original question in this post of mine is not directly related, it is indirectly related to the repair of a PCI card.
This card was repaired by "transplanting" from a donor card.
Α  forum member gave me this idea and he really helped. It was very difficult to find such a similar card. I found it in an old shop and although it was sold only for spare parts, it gave me its PLD and replacing with it the short-circuited PLD of my own original card I made this card work again.
tooki:

--- Quote from: kraka on November 09, 2024, 10:21:00 am ---
--- Quote from: tooki on November 08, 2024, 04:27:07 pm ---You were asked a bunch of specific questions and you ignored them. We are not clairvoyant.

--- End quote ---

I am sorry , i did not saw this questions. I never ignore somebody who try to help. But as i see, this questions made by 807, not by you.
So my apology goes to 807 not to you. If 807 has a problem with me, I would like to discuss it with him, not with others. If his question is important in solving my problem (and it is) he knows better than anyone else and has both the mind and fluency to express it to me himself. No one is a clairvoyant here, just as no one is an interrogator here.

But this information is no longer useful because the problem has been solved, as I will explain in my next reply.

I would like to thank you for trying to help me.

--- End quote ---
I wasn’t seeking an apology for anyone. Just informing you that it’s difficult or impossible to help people who withhold basic information. (Which is a common thing, oddly. With some people, getting essential information is like pulling teeth.)

You also misunderstand the dynamics of asking for help on a forum. When 807 asked for information, he was not asking for him, he was asking for everyone who participates in the thread. It’s a fundamentally communal affair. Even though that is the baseline expectation, 807 even worded it as “It will help if you give us more information.”
kraka:

--- Quote from: tooki on November 09, 2024, 11:49:57 am ---
--- Quote from: kraka on November 09, 2024, 10:21:00 am ---
--- Quote from: tooki on November 08, 2024, 04:27:07 pm ---You were asked a bunch of specific questions and you ignored them. We are not clairvoyant.

--- End quote ---

I am sorry , i did not saw this questions. I never ignore somebody who try to help. But as i see, this questions made by 807, not by you.
So my apology goes to 807 not to you. If 807 has a problem with me, I would like to discuss it with him, not with others. If his question is important in solving my problem (and it is) he knows better than anyone else and has both the mind and fluency to express it to me himself. No one is a clairvoyant here, just as no one is an interrogator here.

But this information is no longer useful because the problem has been solved, as I will explain in my next reply.

I would like to thank you for trying to help me.

--- End quote ---
I wasn’t seeking an apology for anyone. Just informing you that it’s difficult or impossible to help people who withhold basic information. (Which is a common thing, oddly. With some people, getting essential information is like pulling teeth.)

You also misunderstand the dynamics of asking for help on a forum. When 807 asked for information, he was not asking for him, he was asking for everyone who participates in the thread. It’s a fundamentally communal affair. Even though that is the baseline expectation, 807 even worded it as “It will help if you give us more information.”

--- End quote ---

Thank you for your explanations. Next time we will be more careful so that we are all satisfied. Both us and you.
From all of us, to all of you:
 Good Night.
Navigation
Message Index
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod