Author Topic: Rigol DS1074Z signal faulty channel 2.  (Read 1744 times)

0 Members and 1 Guest are viewing this topic.

Offline newbie_electron

  • Contributor
  • Posts: 8
  • Country: kh
  • Junior MCU firmware engineer.
Rigol DS1074Z signal faulty channel 2.
« on: September 10, 2015, 12:59:29 pm »
Hello everyone, sorry for my bad English. I bought a DS1074Z for about two years now and its out of warranty and i haven't been using much lately. Today after i turned it on, I hooked it up to my function generator, first i thought it was my function generator but after i changed the channel 1 or channel 3 or channel 4, the sine signal is perfectly okay. does anyone ever have any problem like this? I have no idea :/. The channel 2 stills detecting the signal except the trigger is completely fail and the voltage display seems to be jumping all the time. 
I like the smell of electronics.
 

Online Shock

  • Super Contributor
  • ***
  • Posts: 3268
  • Country: au
Re: Rigol DS1074Z signal faulty channel 2.
« Reply #1 on: September 10, 2015, 01:22:45 pm »
Check the warranty isn't it got 3 years?
Soldering/Rework: Pace ADS200, Pace MBT350
Multimeters: Fluke 87V, 117, 27/FM               >>> WANTED STUFF <<<
Oszilloskopen: Rigol DS1054Z, Phillips PM3065
 

Offline newbie_electron

  • Contributor
  • Posts: 8
  • Country: kh
  • Junior MCU firmware engineer.
Re: Rigol DS1074Z signal faulty channel 2.
« Reply #2 on: September 11, 2015, 09:23:01 am »
So do I have to send them back to the seller or I send them back to rigol company? i bought it from ebay therefore its a little hard to send them back.
I like the smell of electronics.
 

Offline Karel

  • Super Contributor
  • ***
  • Posts: 1561
  • Country: 00
Re: Rigol DS1074Z signal faulty channel 2.
« Reply #3 on: September 11, 2015, 09:33:45 am »
Are you sure it's not the probe?
 

Offline newbie_electron

  • Contributor
  • Posts: 8
  • Country: kh
  • Junior MCU firmware engineer.
Re: Rigol DS1074Z signal faulty channel 2.
« Reply #4 on: September 11, 2015, 01:07:18 pm »
I am sure it is not the prob. So and i kinda not trust people by sending it back to Hong Kong to get fixed. :/
I like the smell of electronics.
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf