Author Topic: Lost Artek manuals  (Read 2831 times)

0 Members and 1 Guest are viewing this topic.

Offline tatelTopic starter

  • Frequent Contributor
  • **
  • Posts: 575
  • Country: es
Lost Artek manuals
« on: January 20, 2024, 06:56:27 pm »
Unfortunately, it is obvious that after Mr. Henderson's death, his widow is unable to find HP8640B-AN/USM-323 manual (military version of HP8640B). The same goes for the HP3456A manual. If you read this message and have any of these manuals, perhaps you could send them to Mrs. Henderson... and leave a reply here so I could buy them from her.
 

Offline bdunham7

  • Super Contributor
  • ***
  • Posts: 8004
  • Country: us
Re: Lost Artek manuals
« Reply #1 on: January 20, 2024, 07:17:47 pm »
HP 3456A manuals available here:

https://bama.edebris.com/manuals/hp/3456a
A 3.5 digit 4.5 digit 5 digit 5.5 digit 6.5 digit 7.5 digit DMM is good enough for most people.
 

Offline tatelTopic starter

  • Frequent Contributor
  • **
  • Posts: 575
  • Country: es
Re: Lost Artek manuals
« Reply #2 on: January 20, 2024, 10:01:20 pm »
Thank you. Truth is, I already got these... but after getting from artek the manual for non-military HP8640B, if the have a manual for one of my devices, I'm buying it.

Not a problem for 3456, thanks to the link you provided. But the manual for HP8640B-AN/USM-323, if not from artek, comes as printed sheets, unbound, unknown quality, 5x the price...
 

Offline Wallace Gasiewicz

  • Super Contributor
  • ***
  • Posts: 1330
  • Country: us
Re: Lost Artek manuals
« Reply #3 on: January 21, 2024, 01:04:15 pm »
For anyone concerned...   

Artek Copies of the 8640 Military have been located and will be on their way to Mrs Henderson if her copies cannot be locatedArtek Copies of the 3456 high resolution manual have been forwarded already.
There are folks on the Groups.io HP Agilent forum working on this. 

We have appreciated the clear copies Artek has provided over the years.
 
The following users thanked this post: lowimpedance, factory

Offline tatelTopic starter

  • Frequent Contributor
  • **
  • Posts: 575
  • Country: es
Re: Lost Artek manuals
« Reply #4 on: January 21, 2024, 01:21:38 pm »
Thank you. I wonder if there are other manuals missing. I ordered these manuals from Artek site last June.
 

Offline Jamie_A

  • Contributor
  • Posts: 15
  • Country: ca
Re: Lost Artek manuals
« Reply #5 on: January 27, 2024, 06:41:51 pm »
Do digital orders on the Artek site work again? Did Mrs Henderson get control of the site back?
I'm needing to make an order.
 

Online PartialDischarge

  • Super Contributor
  • ***
  • Posts: 1626
  • Country: 00
Re: Lost Artek manuals
« Reply #6 on: January 27, 2024, 07:05:17 pm »
I bought 3 manuals last December and they did arrive just fine.
 
The following users thanked this post: Jamie_A

Offline tatelTopic starter

  • Frequent Contributor
  • **
  • Posts: 575
  • Country: es
Re: Lost Artek manuals
« Reply #7 on: January 28, 2024, 01:52:14 am »
I bought 3 manuals last December and they did arrive just fine.

Were any of these manuals HP8640B-AN/USM-323 and/or HP3456A? Could you confirm that, please?

Artek has been functioning, yes, but Mrs Henderson was unable to locate these manuals.
 

Online PartialDischarge

  • Super Contributor
  • ***
  • Posts: 1626
  • Country: 00
Re: Lost Artek manuals
« Reply #8 on: January 28, 2024, 02:52:24 am »
I bought 3 manuals last December and they did arrive just fine.

Were any of these manuals HP8640B-AN/USM-323 and/or HP3456A? Could you confirm that, please?.
No
 

Offline edavid

  • Super Contributor
  • ***
  • Posts: 3427
  • Country: us
Re: Lost Artek manuals
« Reply #9 on: January 28, 2024, 05:06:47 am »
Member SuperMario posted in this thread that he has the Artek HP8640B/323 manual:

https://www.eevblog.com/forum/testgear/hp-8640b-opt-323-service-manual/

Perhaps he could assist you.
 

Offline tatelTopic starter

  • Frequent Contributor
  • **
  • Posts: 575
  • Country: es
Re: Lost Artek manuals
« Reply #10 on: February 01, 2024, 03:20:09 pm »
Well, I ordered it again. This time I received it in about 30 minutes.

So it looks as if Artek is 100% in shape now
 
The following users thanked this post: lowimpedance, edavid, Wallace Gasiewicz


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf