Author Topic: Rohde &Schwarz APN 62 keyboard problem  (Read 678 times)

0 Members and 1 Guest are viewing this topic.

Offline Simon Spiers

  • Regular Contributor
  • *
  • Posts: 76
  • Country: gb
    • My Youtube channel
Rohde &Schwarz APN 62 keyboard problem
« on: February 12, 2016, 08:22:36 pm »
Hi all. I have just bought a R&R APN 62 LF sig gen in non working condition.
The unit powers up but I have no control from any keyboard button other than the rotary encoder. The unit is stuck on the termination adjustment  which seems to work fine but that's all I can do.
The generator is outputting a waveform so it looks to me like the CPU is working fine.
I have looked at the only chip that has any logic on it regarding keyboard entries and that is a NEC 71055 parallel interface unit.
Logic can be seen on pins 1 thro 4 and 39 and 40.
There seems to be no change to any other pins on the chip.
I have changed this IC thinking it may be the problem but it's not.
No manuals are available  unfortunately.
Any ideas pointers or help would be greatfully appreciated.

Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo