a decent 9 volt battery connector?

[Stray Electron]

    I'm looking for a recommendation. I'm repairing a piece of TE that has a broken 9 volt battery connector.  Does anyone know of a decently constructed 9 volt battery connector (with wire leads) that is readily available?  Preferably somewhere like Amazon or Ebay so I don't have to deal with an absurd shipping charge and/or minimum purchase. I can get 10 for about $8 on Amazon which is not unreasonable but I'm dubious of the durability.  Can anyone recommend a particular seller or brand?

[BlownUpCapacitor]

Do you need the lead to come from the middle or the side of the connector?

[BILLPOD]

Disassemble an old 9V battery and make your own

[TimFox]

You didn't specify a country, so I don't know how hard it is to get these.
I have always used Keystone connectors for 9 V batteries:
https://www.keyelco.com/category.cfm/Battery-Coin-Cell-Holders-Contacts-Clips/9-Volt-Connector-Straps/p/404/id/421

[Stray Electron]

Do you need the lead to come from the middle or the side of the connector?

   I don't think that it matters. The battery space is pretty large.

[David Hess]

Disassemble an old 9V battery and make your own

That is what I do.  I have a parts drawer full of 9 volt battery end caps, but I throw away the plastic ones because soldering melts the plastic.

[Stray Electron]

You didn't specify a country, so I don't know how hard it is to get these.
I have always used Keystone connectors for 9 V batteries:
https://www.keyelco.com/category.cfm/Battery-Coin-Cell-Holders-Contacts-Clips/9-Volt-Connector-Straps/p/404/id/421

     Thanks for the suggestion of the Keystone parts, they look like what I was looking for.  Digikey, Mouser, Allied and all of the other large parts houses carry them and they're available in Europe and in North and South America so I should be GTG.  I placed an order this morning and I should have the parts soon.