Electronics > Repair
R&S SMU 200A Power Supply schematic?
(1/1)
Crambone:
Guys I have a power supply issue trying to identify a fried component.
LAMBDA Vega 450
Product Code V403NBL
attached a photo
The component in question attaches to the negative leg of C14 radial electrolytic 10uf 63v.
I tried to identify while on board but no visible markings under a microscope. I removed it and it just shows an open no readings at all.
Any help would be appreciated.
sprit:
Hi Crambon, wish you have a nice day.
As for your problem, I can tell you it is the resistor. The value is 4R7. Hope this helps.
Sincerely, Jing Feng
Harry_22:
Hi!
Don't switch it on!
I will help you as soon as I land.
Harry_22:
Hi again!
Due to the fact that R&S equipment still contains these units, I do not have the right to provide an online repair guide.
I'll write to you in a personal message.
The rest of you please forgive me.
Navigation
[0] Message Index
Go to full version