Electronics > Repair
R&S ZVB8 VNA
<< < (4/5) > >>
Harry_22:
Could you prepare the image and send me a link.
 will run it on my MB.
fjullien:
Ok, thanks !
Any preference/recommendation for the HDD cloning tool ?
Gerhard_dk4xp:
I attached the ZVB hard disk to a Linux workstation and simply
used the standard command dd. (disk dump, if =input file...)

root@silver>  dd if= /dev/sdc1  of= big_file.bin
and then with the new disk  and the order of the files reversed.
That worked. In Linux/Unix a drive or partition can be used
as just a huge file. Triple check the device names. You can
easily kill your Linux filesystem by giving the wrong names.


I first used a Digitus board for the copy, that produced a broken
file system. You may be tempted to use a huge SSD as the new
disk. That may stress the limits of Win XP, esp. without the
disk size service pack.  A 256 GB Samsung SATA SSD worked instead
of the 160 GB Toshiba laptop sata that was in the ZVB. I made the
1st partition on the SSD  slightly bigger than required and left the
rest unallocated.

midnight here,
Cheers,
Gerhard
Harry_22:
You can use portable version from here.
https://drive.google.com/file/d/1AnKzbSysrRoz2g-niKmA8EFcfX6HB0W7/view?usp=drive_link
fjullien:
Thanks Gerhard and Harry.
Harry, I sent the link to my disk image in your DM.
Navigation
Message Index
Next page
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod