Electronics > Repair

R&S ZVB8 VNA

<< < (4/5) > >>

Harry_22:
Could you prepare the image and send me a link.
 will run it on my MB.

fjullien:
Ok, thanks !
Any preference/recommendation for the HDD cloning tool ?

Gerhard_dk4xp:
I attached the ZVB hard disk to a Linux workstation and simply
used the standard command dd. (disk dump, if =input file...)

root@silver>  dd if= /dev/sdc1  of= big_file.bin
and then with the new disk  and the order of the files reversed.
That worked. In Linux/Unix a drive or partition can be used
as just a huge file. Triple check the device names. You can
easily kill your Linux filesystem by giving the wrong names.


I first used a Digitus board for the copy, that produced a broken
file system. You may be tempted to use a huge SSD as the new
disk. That may stress the limits of Win XP, esp. without the
disk size service pack.  A 256 GB Samsung SATA SSD worked instead
of the 160 GB Toshiba laptop sata that was in the ZVB. I made the
1st partition on the SSD  slightly bigger than required and left the
rest unallocated.

midnight here,
Cheers,
Gerhard

Harry_22:
You can use portable version from here.
https://drive.google.com/file/d/1AnKzbSysrRoz2g-niKmA8EFcfX6HB0W7/view?usp=drive_link

fjullien:
Thanks Gerhard and Harry.
Harry, I sent the link to my disk image in your DM.

Navigation

[0] Message Index

[#] Next page

[*] Previous page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod