EEVblog Electronics Community Forum

Electronics => Repair => Topic started by: 2X on June 29, 2024, 07:03:27 pm

Title: Rubber Belt For Printer
Post by: 2X on June 29, 2024, 07:03:27 pm
Hello,
I have the below rubber belt from an old printer. Do you know where can I find a belt like this or what characteristis I have to find the same... like the diameter, number of seretions?
Title: Re: Rubber Belt For Printer
Post by: Jeff eelcr on June 29, 2024, 07:29:52 pm
Contact PRB, Projector Recorder Belt Company with all the infomation you did not include they might have one for a ?
Jeff
Title: Re: Rubber Belt For Printer
Post by: Gyro on June 29, 2024, 07:41:05 pm
Looking at listings on ebay for timing belts (machine not car, look in the Business, office and industrial section), the quoted dimensions are tooth pitch, eg, 2mm, diameter / number of teeth (both are usually stated) and width.

P.S. They're also known as synchronous belts.
Title: Re: Rubber Belt For Printer
Post by: 2X on June 29, 2024, 08:27:10 pm
Quote from: Gyro on June 29, 2024, 07:41:05 pm
Looking at listings on ebay for timing belts (machine not car, look in the Business, office and industrial section), the quoted dimensions are tooth pitch, eg, 2mm, diameter / number of teeth (both are usually stated) and width.

P.S. They're also known as synchronous belts.

Also I found the below:

https://in.rsdelivers.com/browse/mechanical-fluid-power-tools/mechanical-power-transmission/belts-pulleys/timing-belts (https://in.rsdelivers.com/browse/mechanical-fluid-power-tools/mechanical-power-transmission/belts-pulleys/timing-belts)

https://www.google.com/search?q=timing%20belts%20for%20printer&udm=2&tbs=rimg:CTdIbu0pjozyYSPlDMFM5M52sgIAwAIA2AIA4AIA&hl=el&sa=X&ved=0CCYQuIIBahcKEwjQtOrg0YGHAxUAAAAAHQAAAAAQWw&biw=1920&bih=911&dpr=1 (https://www.google.com/search?q=timing%20belts%20for%20printer&udm=2&tbs=rimg:CTdIbu0pjozyYSPlDMFM5M52sgIAwAIA2AIA4AIA&hl=el&sa=X&ved=0CCYQuIIBahcKEwjQtOrg0YGHAxUAAAAAHQAAAAAQWw&biw=1920&bih=911&dpr=1)

Many thanks for your help.