Author Topic: schematic need  (Read 1795 times)

0 Members and 1 Guest are viewing this topic.

Offline mohandes

  • Contributor
  • Posts: 35
schematic need
« on: July 14, 2016, 12:47:54 am »
hi any body have schematic inverter welder ZX7-200A??
 



Offline JacobPilsen

  • Regular Contributor
  • *
  • Posts: 109
  • Country: cz
Re: schematic need
« Reply #3 on: July 16, 2016, 02:05:09 am »
Now you can sign up by completing an electrical test.
Furthermore, now, you can register to the site if you fill up a simple electricity test.
« Last Edit: July 16, 2016, 02:06:49 am by JacobPilsen »
 
The following users thanked this post: mohandes

Offline retiredcaps

  • Super Contributor
  • ***
  • Posts: 3271
  • Country: ca
Re: schematic need
« Reply #4 on: July 16, 2016, 03:02:28 am »
On elektrotanya, you don't need an userid to download.  I have used that site many times to download for free, but you are limited to 2 downloads per day and you have to have patience as the text below describes ...

The preview is worse quality than the original pdf.
This file is downloadable free of charge: ...processing...
(You are not logged in, only 2 downloads per day possible for you.)
 
The following users thanked this post: mohandes, Ijaz

Offline Ijaz

  • Contributor
  • Posts: 9
  • Country: pk
Re: schematic need
« Reply #5 on: July 26, 2016, 04:15:26 am »
On elektrotanya, you don't need an userid to download.  I have used that site many times to download for free, but you are limited to 2 downloads per day and you have to have patience as the text below describes ...

The preview is worse quality than the original pdf.
This file is downloadable free of charge: ...processing...
(You are not logged in, only 2 downloads per day possible for you.)

Nice tip, one should just wait for the "processing" to change.
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf