EEVblog Electronics Community Forum

Electronics => Repair => Topic started by: hscade on May 05, 2019, 09:17:59 pm

Title: Searching for name of this connector
Post by: hscade on May 05, 2019, 09:17:59 pm

Hi,

anyone knows the exact name of this connector and maybe also for the name for the socket?
It from an Anycubic I3 Mega 3d printer.

Kind Regards,
rampDD

Title: Re: Searching for name of this connector
Post by: JimG on May 05, 2019, 10:37:18 pm

could be AMP, TE, MOLEX. is there any identifying marks on the plug? you could measure out the pins and order a header and plug of your own from mouser or digikey.

Title: Re: Searching for name of this connector
Post by: SoundTech-LG on May 06, 2019, 01:47:33 am

...but more likely, PHOENIX

https://www.digikey.com/products/en/connectors-interconnects/terminal-blocks-headers-plugs-and-sockets/370?FV=ffec5399 (https://www.digikey.com/products/en/connectors-interconnects/terminal-blocks-headers-plugs-and-sockets/370?FV=ffec5399)