Author Topic: Help finding HP BNC p/n: 1250-0252 or how to buy from Keysight?  (Read 546 times)

0 Members and 1 Guest are viewing this topic.

Offline TERRA Operative

  • Frequent Contributor
  • **
  • Posts: 609
  • Country: jp
  • Voider of warranties
    • Near Far Media Youtube
I'm starting on the repair of a HP 8160A 50Mhz Programmable Pulse Generator and I found one of the BNC jacks on the front panel is damaged.

The HP part number is 1250-0252, which cross references to Amphenol 31-12446-4NA , or 28JS108-1 from various other manufacturers.

I have found that Keysight has them in stock but they won't allow a common peasant like me to make an account to buy one.... |O

Does anyone know where or how I can get one of these?
Any circuit design must contain at least one part which is obsolete, two parts which are unobtainable, and three parts which are still under development.

https://www.youtube.com/user/NearFarMedia/
 

Offline Tony_G

  • Frequent Contributor
  • **
  • Posts: 581
  • Country: us
  • Checkout my old test gear channel (link in sig)
    • TGSoapbox
Re: Help finding HP BNC p/n: 1250-0252 or how to buy from Keysight?
« Reply #1 on: March 20, 2019, 04:35:19 pm »
I've heard this before about Keysight but I had no problem in creating a personal account - The only thing I had to do was to call them to get the credit card added.

I've ordered parts and calibration services without issue but I can't remember if I did the calibration stuff first - That might have been the secret to getting an account.

Alternatively it might be because I'm using Keysight US rather than in another country.

I'd recommend just giving them a direct email (usa_orders@keysight.com) or failing that a call - I think you can get worldwide info from here by changing the country:

https://www.keysight.com/main/contactInformation.jspx?nid=-11143.0.00&lc=eng&cc=US

TonyG


Offline Ordinaryman1971

  • Regular Contributor
  • *
  • Posts: 189
  • Country: us
Re: Help finding HP BNC p/n: 1250-0252 or how to buy from Keysight?
« Reply #2 on: March 20, 2019, 08:08:01 pm »
Can I please have a picture of the BNC itself, I may have one for you. I was looking at the drawing but... it looks like a BNC to me.
There is so many flavors.. not sure if it's one of those I have.
 

Offline TERRA Operative

  • Frequent Contributor
  • **
  • Posts: 609
  • Country: jp
  • Voider of warranties
    • Near Far Media Youtube
Re: Help finding HP BNC p/n: 1250-0252 or how to buy from Keysight?
« Reply #3 on: March 21, 2019, 07:23:24 pm »
Here's a few photos of the part in question.
Any circuit design must contain at least one part which is obsolete, two parts which are unobtainable, and three parts which are still under development.

https://www.youtube.com/user/NearFarMedia/
 

Offline tkamiya

  • Frequent Contributor
  • **
  • Posts: 947
  • Country: us
Re: Help finding HP BNC p/n: 1250-0252 or how to buy from Keysight?
« Reply #4 on: March 24, 2019, 05:11:44 pm »
I have something similar but threaded part is shorter.  Part number is: 74868 1250-0870-1

I think it came out of HP something.
 

Online Mechatrommer

  • Super Contributor
  • ***
  • Posts: 9016
  • Country: my
  • reassessing directives...
if something can select, how cant it be intelligent? if something is intelligent, how cant it exist?
 

Offline coromonadalix

  • Super Contributor
  • ***
  • Posts: 2015
  • Country: ca
Re: Help finding HP BNC p/n: 1250-0252 or how to buy from Keysight?
« Reply #6 on: March 24, 2019, 06:56:33 pm »
I used my company as a front to order parts from Keysight in Canada, it was a pain due to languages issues.  It may not be the issues in you country.

Register yourself, and give them your credit card and try to order the parts and see .... it may work in the end
 

Offline TERRA Operative

  • Frequent Contributor
  • **
  • Posts: 609
  • Country: jp
  • Voider of warranties
    • Near Far Media Youtube
Re: Help finding HP BNC p/n: 1250-0252 or how to buy from Keysight?
« Reply #7 on: March 28, 2019, 04:01:14 pm »
Alrighty, got some good news (for me)! :D

I emailed Keysight Japan directly and they said Yep, can do. :)
I should have tried that to start with, but now I know I can get my parts if I need them in the future. Nice.
Any circuit design must contain at least one part which is obsolete, two parts which are unobtainable, and three parts which are still under development.

https://www.youtube.com/user/NearFarMedia/
 

Offline Tony_G

  • Frequent Contributor
  • **
  • Posts: 581
  • Country: us
  • Checkout my old test gear channel (link in sig)
    • TGSoapbox
Re: Help finding HP BNC p/n: 1250-0252 or how to buy from Keysight?
« Reply #8 on: March 28, 2019, 07:51:38 pm »
Nice, good to hear you're all sorted.

TonyG


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf