Agilent DSO6054A boot problem

[wat]

Hello, this is what I get at boot (DSO6014)
in case it might be useful:

Code: [Select]

                            VxWorks System Boot


Copyright 1984-2002  Wind River Systems, Inc.





CPU: Agilent KOM PPC405, SA27E rev1
Version: VxWorks5.5.1
BSP version: 1.2/0
Creation date: Oct  5 2006, 09:45:26




Press any key to stop auto-boot...
 0
auto-booting...


boot device          : tffs;usb
unit number          : 0
processor number     : 0
file name            : sys6000
flags (f)            : 0x8
target name (tn)     : a-d6014a-007470
other (o)            : emac0

Attaching to TFFS... done.
Loading /tffs0/bin/sys6000.bin... 8974992
Starting at 0x10000...

Attaching interface lo0...done
USBD Initialized.

Adding 19920 symbols for standalone.
C:/  - Volume is OK

BTW I have another one, MSO6034A that doesn't boot, and no messages on the serial port at all.
I probed with a logic analyser and both lines are 3.3V (as they should be on idle)

[zgjloves]

Hi, has your dso6054A been repaired? My dso6104A has the same problem. Can you help me? Thank you very much!

[newtech95]

Program BGA chip desoldering

[wat]

Nope, still broken. I didn't have much resources so I gave up