Author Topic: Sencore LC102 Capacitor Analyzer: Need Help With Incorrect Measurements  (Read 3223 times)

0 Members and 1 Guest are viewing this topic.

Offline valley001Topic starter

  • Frequent Contributor
  • **
  • Posts: 339
  • Country: 00
Ok, points taken.  Thanks for your help anyway.  Ill carry on. 
 

Offline coromonadalix

  • Super Contributor
  • ***
  • Posts: 5795
  • Country: ca
My thoughts too, that's why i kinda retracted myself too

And sadly   you play with your posted threads, you change them many times, title changes,    etc ...  i have to go back to follow you ...

And yes  i think you may create more problems than solution ??

sorry
« Last Edit: August 16, 2022, 08:55:23 am by coromonadalix »
 

Offline valley001Topic starter

  • Frequent Contributor
  • **
  • Posts: 339
  • Country: 00
Sorry for my lack of clarity, fixing electronics is obviously not my day job but I do enjoy it and have learned a lot here.  I thought I was making my thread easier to follow but obviously not!

R158 potentiometer was open/faulty, I'm near certain that this has been the case this whole time.  I have no idea why I was getting the readings I did earlier (80ma), or why it behaved the way it did after swapping LM317.  After replacing the open pot now I get reasonable readings in the 2-2000uf range where I never did before in the time I have owned it.

Thanks everyone for your patience and time. 


« Last Edit: August 16, 2022, 03:21:25 pm by valley001 »
 

Offline coromonadalix

  • Super Contributor
  • ***
  • Posts: 5795
  • Country: ca
 :-+
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf