Electronics > Repair
Siemens EH601EB11/02 induction hob
(1/1)
Timoteo:
Hi, I am trying to fix this device but had not so much luck.
Have found in this forum and another place on the web some service manual and code error but not for this exact model.
But none of schematics for my boards, in my case the hob does not turn on and it looks like a control board (YL202) problem.
Have measured the 4 wires connector and it does have 24v and 5v the signal on lin I do not know what to expect...
Can some one give me a hand?
Thanks for your help.
Best regards,
Timóteo
Timoteo:
I fixit it!
will let the details so some other members can check also.
After spend some time checking the board for default components.
The problem was with the power rail line that was interrupted for half of the board...
Some solder rework and nail polish from my wife and it works again.
Thanks for your time.

Timóteo
Navigation
Message Index
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod