| Electronics > Repair |
| Siglent oscilloscope screen SHS1102 frozen |
| << < (4/5) > >> |
| Alex2trois:
Tautech, Est ce qu'il y a des pilotes pour W10 ? Pour faire fonctionner EasyscopeX Merci Are there drivers for W10? To operate EasyscopeX THANKS |
| Alex2trois:
Tautech, C'est encore moi désolé, je n'est pas compris le réglage des compensations probes It's me again sorry, I don't understand the probe compensation setting :o Thanks |
| tautech:
--- Quote from: Alex2trois on September 29, 2024, 08:00:06 pm ---I have good news I was lucky :phew: : probably unsoldered unintentionally while examining all the solders or a bad solder on the usb controller... I downloaded the ISP62BD datasheet, I think that pin 63 (D0) and 64 (D1) were in contact (short circuit) or only pin 63 (D1) without contact, with a little soldering and it's Perfect ! Now as soon as I insert a USB key the device instantly tells me: “USB key plugged in” “USB key unplugged” ;) Firmware update shs1000 5.09.01.07 went well Boot time of shs 1102 is approximately 16 seconds So now I am in software version 5.09.01.07 and hardware version 8-21-3.6 --- End quote --- Good work Alex ! :clap: Enjoy. --- Quote ---What does cfg mean? Configuration can be... --- End quote --- CFG files are for configuring the displayed brand, say for a rebrand that Siglent supply. --- Quote from: Alex2trois on September 29, 2024, 08:20:19 pm ---Are there drivers for W10? To operate EasyscopeX --- End quote --- NIVISA must be also installed as it contains the USB connectivity drivers. The NIVISA Runtime package is the minimum requirement to get these drivers. The EasyScopeX install instructions give guidance and NIVISA should be installed first otherwise W10 will assign the incorrect driver for your scope or other device. If you have problems connecting to EasyScopeX I have a troubleshooting document if you need it. --- Quote from: Alex2trois on September 29, 2024, 08:30:54 pm ---It's me again sorry, I don't understand the probe compensation setting :o --- End quote --- See P4 https://siglentna.com/wp-content/uploads/dlm_uploads/2017/10/SHS1000_UserManual_UM03010-E07C.pdf |
| Alex2trois:
Bonjour Tautech, Comme j'aimerais vous avoir comme voisin ;) Je ne trouve pas ce téléchargement chez Siglent Connais tu un site fiable sans risque ? Merci, bonne journée Alexandre How I would love to have you as a neighbor ;) I can't find this download from Siglent Do you know of a reliable, risk-free site? Thank you, have a nice day Alexander |
| tautech:
--- Quote from: Alex2trois on September 30, 2024, 07:29:35 am ---I can't find this download from Siglent Do you know of a reliable, risk-free site? --- End quote --- The download link above is to Siglent HQ in Shenzhen and is 100% trustworthy. |
| Navigation |
| Message Index |
| Next page |
| Previous page |