Author Topic: Simple question, Hard to find answer. Fluke 8840A or 8842 VFD  (Read 737 times)

0 Members and 1 Guest are viewing this topic.

Offline sampler1Topic starter

  • Regular Contributor
  • *
  • Posts: 80
  • Country: ca
Hi all,
I am looking for the dimensions of  the VFD on a Fluke 8840A or 8842. Looked around on the net and cannot find any info..
Greatly appreciated!
“Electronic devices are powered by white smoke. When smoke goes out, device is dead.”
 

Offline M0HZH

  • Regular Contributor
  • *
  • Posts: 211
  • Country: gb
    • QRPblog
Re: Simple question, Hard to find answer. Fluke 8840A or 8842 VFD
« Reply #1 on: April 15, 2020, 09:50:00 am »
The VFD is the biggest problem on these, as it goes dim. I think there is a LED replacement: http://bbs.38hot.net/forum.php?mod=viewthread&tid=828474

I have an 8840A "for parts or not working" on the way, I could get you the answer in a few days if no one else comes back by then.
 

Offline wn1fju

  • Frequent Contributor
  • **
  • Posts: 579
  • Country: us
Re: Simple question, Hard to find answer. Fluke 8840A or 8842 VFD
« Reply #2 on: April 15, 2020, 11:44:58 am »
I make the VFD on my 8840A to be:  120 mm wide, 33 mm high, 8 mm deep.  The little bulb in the top left corner sticks out 5 mm.  I can't see the back of the VFD so don't know what the pin spacing is.

But you can definitely see the problem with mine !!!
 

Offline sampler1Topic starter

  • Regular Contributor
  • *
  • Posts: 80
  • Country: ca
Re: Simple question, Hard to find answer. Fluke 8840A or 8842 VFD
« Reply #3 on: April 15, 2020, 02:06:16 pm »
Thank you so so much for the information.  It is so greatly appreciated,
There might be an LED display coming from Europe this summer .. I was just curious about this info.for myself.
Ill get back on this in the future..
Stay well
“Electronic devices are powered by white smoke. When smoke goes out, device is dead.”
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf