EEVblog Electronics Community Forum

Electronics => Repair => Topic started by: hitecelec on October 04, 2024, 01:54:36 pm

Title: SMPS Artesyn NLP250N-99S120N01J used in Tek MDO4054-3
Post by: hitecelec on October 04, 2024, 01:54:36 pm

Hi 

This power supply used in Tek Scope .

Fuse F3 Resistor type Fuse  burnt need to know the fuse rating
(Fuse is resistor  type in heatsink sleeve)

PFA the photos

Title: Re: SMPS Artesyn NLP250N-99S120N01J used in Tek MDO4054-3
Post by: hitecelec on October 05, 2024, 12:26:34 pm

The fuse is 1A green color probably Little fuse ( I just gathered the broken remnants and was able to figure out)
not sure but slow blow or fast blow though