I picked up a rather sad and dirty looking BK Precision 2800 meter at a local hamfest for $2 on Saturday. After going to the store for some C cell batteries it seems to power up; the main IC seems to be ok but the two rightmost digits do not work.
From google images, mine is significantly dirtier

Data into IC4 (75491) looks good, but there seems to only be a bit of sawtooth shaped ripple on the output pins. Bypassing the output pins with a 1K resistor to ground causes the respective LED display to glow so the displays are OK.
There is currently one guy on ebay in the US selling NOS Radioshack Archer branded 75491 chips, everything else is probably counterfeit junk from china. I would rather not pay nearly $10 for an IC if a modern chip is available with the same pinout.
I will post images and some waveform shots once I get home.
Thanks in advance