EEVblog Electronics Community Forum

Electronics => Repair => Topic started by: zhang3166a on April 19, 2023, 04:05:13 pm

Title: TDS5052 Loss of calibration data
Post by: zhang3166a on April 19, 2023, 04:05:13 pm

I have a TDS5052 non-B oscilloscope, and the display is as shown in the figure when it is turned on. Has anyone encountered it?
Is there any way to solve it? It used to be perfect. Recently, this prompt appeared when I turned on the computer.

Title: Re: TDS5052 Loss of calibration data
Post by: calibrationfixture on April 21, 2023, 06:07:47 am

Hi,

Yes, I have encountered the same display:

https://www.eevblog.com/forum/repair/tds5104-cant-find-cal-data-during-starting-scope-application/msg4624741/#msg4624741 (https://www.eevblog.com/forum/repair/tds5104-cant-find-cal-data-during-starting-scope-application/msg4624741/#msg4624741)

Succes,

Calibrationfixture