HP 1663A logic Analyzer not starting up after flash ROM update.

[imac]

My HP 1663A logic Analyzer does not start up after the flash ROM update. The power up self test runs okay and after that a grey screen with some strange signs.

Is there a way to re-run the flash ROM update at startup?

[imac]

The update was okay.

[imac]

Is there anyone that have a dump of the eprom U14 01660-80004?

[fzabkar]

Could we see your flash dump and update files?

[imac]

Here is the 3.01 sw for the OS https://www.keysight.com/se/en/lib/software-detail/instrument-firmware-software/1660aas-series-operating-system-software-version-301-sw568.html

I don't have any dump of the eprom.

[fzabkar]

I can see how the files are structured. There is a 0x200-byte header after which is the actual payload. The payload is delivered in 0x100-byte blocks, with the first big-endian word being the byte count for that block. All blocks except the last have a byte count of 0xFE (= 0x100 - two bytes for the count).

If you were to provide a flash dump, I could verify whether the payload has been unpacked correctly. What surprises me is that there doesn't appear to be any checksum.

I have attached the unpacked files, as I see them.