Hi, I lost my lpl psu for my enlarger. I bought a replacement psu however the sockets and plugs are different. On my enlarger the psu only supplies the lamp a 24v 200w and the leadhas a five sided connector. The fan plugs directly. However on the replacement paying the connection is via a round three pin type that supplies both the lamp and fan.
If possible I prefer at this stage not to be too drastic and keep each as they are. I was thinking of. Just getting the suitable replacement plug and socket and some lead and making a joining lead. However I haven't been able to find any of the right plugs or sockets. I have tried the repair department for the enlarger and they do not have any or know where I might find them. Have included some pictures of the psi and lead to the lamp . Hopefully that someone may have some ideas. It has been suggested to convert to iec connections. ?..