EEVblog Electronics Community Forum

Electronics => Repair => Topic started by: harrison@cs.unc.edu on July 23, 2021, 09:17:35 pm

Title: Tek 7A13
Post by: harrison@cs.unc.edu on July 23, 2021, 09:17:35 pm

I have a broken 7A13...the later version with LED's. The serial number does not have the B for Beaverton in front of the number.
Online schematics don't quite match the plug in. The serial number starts with 102xxx. Does anyone have a manual for that version?
The BAMA archive is close, but not good enough to find the faulty parts.
Any help is appreciated.

Title: Re: Tek 7A13
Post by: David Hess on July 23, 2021, 09:47:57 pm

I would check against the documentation at tekwiki, and then ask artekmanuals.