EEVblog Electronics Community Forum
Electronics => Repair => Topic started by: tonyc on July 14, 2016, 09:29:53 pm
-
My 5006 stopped working a couple of weeks ago. When I turn the power switch on I still hear the beep sound but no DC power come out of the slots. I know the AC power is good because the DMM module uses AC power and still works. Does anybody know what are the usual culprits for such problem?
-
I think you really need take apart this guy and measure something :-DMM
A few photos will be helpful 8)
-
In the TM5006, the DC power is provided by a switching power supply while the AC comes from a line transformer. Obviously there is a problem with the switching power supply; the primary suspect is the aluminum electrolytic capacitors which are probably worn out with age.
There is no beeper so I assume the beep is coming from the switching power supply when it tries to start.