EEVblog Electronics Community Forum
Electronics => Repair => Topic started by: vectra_1098 on April 10, 2019, 10:39:19 am
-
Hi ,
I have another Tektronix Scope a TDS 460A with a failed power supply.
Does anybody have any schematics/pcb layouts for this PSU ??
Thanks in advance...
-
Some info here https://www.eevblog.com/forum/repair/tds400-power-supply/msg2138764/#msg2138764 (https://www.eevblog.com/forum/repair/tds400-power-supply/msg2138764/#msg2138764)
-
There isn't really schematics available for the TDS *** scopes as far as I know. When I rebuilt my TDS 420's power supply I used the schematic for a Lecroy 9354A power supply, it is about 90% the same power supply, you just have to be aware of the differences. I'm not sure if the TDS 460 has a similar supply to the 420, but a link is here: http://bee.mif.pg.gda.pl/ciasteczkowypotwor/LeCroy/LeCroy_9354A-M-L-TM_Service_Manual_Complete.pdf (http://bee.mif.pg.gda.pl/ciasteczkowypotwor/LeCroy/LeCroy_9354A-M-L-TM_Service_Manual_Complete.pdf) - pages 8-195 and 8-196.
-
Is it the PS-1690 model you have?
-
Hi,
The PSU has a TEK number on the top silk TEK 119-3939-02
I tried to send a jpeg photo but the site failed to send it
Thanks
-
Just fixed my TDS420A yesterday,couldn't power on.the LVPS failed on Line voltage 110V but worked on 220V,
I took out the power supply board and replaced the C10(22uf/50V).it works now.
-
Hi,
The photo you just sent, I am pretty sure its the same PSU as mine.
I do have problems though my GREEN Module is damaged and I have removed it from the PSU,
I do recall that there is some schematics for them ?
Somebody actually removed the green coating to reveal the circuit ?
Thanks
-
You can find the service manual here https://elektrotanya.com :)
-
Hi,
The photo you just sent, I am pretty sure its the same PSU as mine.
I do have problems though my GREEN Module is damaged and I have removed it from the PSU,
I do recall that there is some schematics for them ?
Somebody actually removed the green coating to reveal the circuit ?
Thanks
-
Hi, what is the value of the tantalum capacitor on the underside power supply pcb (hybrid pin 13-19).
Thanks