| Electronics > Repair |
| Tektronix TDS5054B: Record Length Option: Solved! |
| << < (3/16) > >> |
| calibrationfixture:
hi pac1085, Look at https://www.eevblog.com/forum/testgear/tek-csa7404-repair-project/msg4618210/#msg4618210 Posts Reply #715, 717 in this thread. Succes, Calibrationfixture |
| pac1085:
Hi, I guess I'm not sure what you mean. I can't even get the validate.py to run with the currently installed Options key. This is what it gives me when I try it: PS C:\Users\Philip\Downloads\tek-ssc-master> python.exe .\validate.py GX4ZQ-RZPST-M7RUT-5R957-NYT57-4UN2S-TR4H TDS5054B B010078 A6 EA EB DE 6D 30 AE FE 64 DC EF EF CE 6C DC 5D 4B 86 61 7C FA 00 03 5E 27 00 00 FE 1B 3E BD 50 A2 25 20 00 00 00 00 E8 41 E6 07 C9 10 04 00 00 00 UID mismatch ! UID in key: 5E 27 00 00 FE 1B Calculated UID: 5E 27 00 02 BE 13 CRC: 61B9 CRC mismatch ! My understanding is that I should at least be able to get this script to run, to show me the options breakdown for the scope as it sits now. I didn't see anything specific to the TDS5054B in the recent posts on the thread you linked? Also, if I go on ebay and find a random TDS5054 (non-B) and use validate.py the same way, it seems to work. So it seems like there is something wrong with the script in regards to the TDS5054B model (as mentioned by the OP) PS C:\Users\Philip\Downloads\tek-ssc-master> python.exe .\validate.py 3XPA7-QNLTE-NNQ6E-4RS22 TDS5054 B030145 B9 36 D0 1D 53 91 30 E6 38 D1 0F 62 0C 1C C1 75 00 00 BE 13 57 A4 00 00 00 A0 50 10 00 00 00 00 00 00 00 00 00 00 00 00 CRC: A457 Key is valid, active options: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |
| calibrationfixture:
Hi, You must omit "TDS5054B B010078". These are only needed to generate a Key. The Program is universal. By the way the "All Options Key" for a TDS5054B with B010078 Serialnumber is: PHJHJ-M6G3B-2MZ86-9RPDU-2EYTK-NCVJ Check: PS C:\Users\????????\????????\Python\tek-ssc-master> C:\Python27\python .\validate.py PHJHJ-M6G3B-2MZ86-9RPDU-2EYTK-NCVJ ED A0 83 16 37 39 E0 75 3D FF AF 0D 89 89 8D 89 89 89 00 48 5E 27 00 02 BE 13 DD A6 08 44 FF FF FF FF FF FF FF 76 34 14 10 00 00 00 00 00 This key is for UID 13BE0200275E (S/N 10078, model TDS/DSA/DPO5054B): CRC: A6DD Key is valid, active options: 08 44 FF FF FF FF FF FF FF 00 00 00 00 00 00 00 00 00 Succes, Calibrationfixture |
| pac1085:
Sadly it doesn’t accept that key. It says the new options and applications were not successfully enabled. Try entering the key again (I did a few times to make sure no fat finger) |
| calibrationfixture:
Hi, I read this Thread thoroughly and yes now I understand your problem. Because the Program works with the other Series (I also have a TDS5104) I overlooked it. Except for the fact that the Key isn't accepted by your TDS5054B, the validate.py and gen.py Programs are working now as intended? Another Member of this Forum had the same problem. I contacted him recently (thus in his case PM is working) for another issue, maybe he has now a solution for this: https://www.eevblog.com/forum/testgear/tds5054b-options/msg1166628/#msg1166628 Succes, Calibrationfixture |
| Navigation |
| Message Index |
| Next page |
| Previous page |