Electronics > Repair

Tektronix TDS5054B: Record Length Option: Solved!

<< < (6/16) > >>

calibrationfixture:
Hi again,

For a TDS6154C with SN B010620 and Options 4M, ST, SM, RTE, JA3, PTD it is:

PS C:\Users\????\????\python\tek-ssc-master> C:\Python27\python .\gen.py TDS6154B B010620 08 44 00 00 00 00 80 00 28 00 00 00 00 00 00 00 00 00 (thus string ends in this case with 18 Zero's).

X3URE-768T6-LSDKG-DZ2KE-L2GUZ-6K6J4-FVZ4L-NQ6G4-923A

In general can the number of Zero's or F's be reduced to make it work. This is a Scope dependent Trial and Error Procedure.

Succes,

Calibrationfixture

tv84:

--- Quote from: calibrationfixture on August 28, 2023, 06:05:58 am ---Hi again,

For a TDS6154C with SN B010620 and Options 4M, ST, SM, RTE, JA3, PTD it is:

PS C:\Users\????\????\python\tek-ssc-master> C:\Python27\python gen.py TDS6154B B010620 08 44 00 00 00 00 80 00 28 00 00 00 00 00 00 00 00 00 (thus string ends in this case with 18 Zero's).
X3URE-768T6-LSDKG-DZ2KE-L2GUZ-6K6J4-FVZ4L-NQ6G4-923A

In general can the number of Zero's or F's be reduced to make it work. This is a Scope dependent Trial and Error Procedure.

Succes,

Calibrationfixture

--- End quote ---

This format should work and is much simpler:

DZSMA-M6GKW-46MHA-MKSSS-CADDB-YDSE

calibrationfixture:
Hi tv84,

Or:

NHA5C-M5FLG-T2BTA-TEAAJ-AAAAA-EASC

There is a slight discrepancy in the UID.

It is namely a real TDS6154C on eBay.com. It is a pity that there is no Follow-up from Ko. I didn't have a TDS6000C Series on hand, thus evaluations are appreciated..

Calibrationfixture

tv84:

--- Quote from: calibrationfixture on September 18, 2023, 06:44:29 pm ---There is a slight discrepancy in the UID.

It is namely a real TDS6154C on eBay.com. It is a pity that there is no Follow-up from Ko. I didn't have a TDS6000C Series on hand, thus evaluations are appreciated..

--- End quote ---

Just for reference:

Your license would work in a 6154C but it's not "officially" correct as it's oversized.

I attach a picture that graphically shows what I'm saying. The last license is the correct/official license for the UID/options combo that you were creating.

Pay attention to the blue color bytes...  ;)

calibrationfixture:
Hi tv84,

Thank you for your reply. I know that the Option Mask String I provided was too long but Ko asked for:


--- Quote from: Ko on August 27, 2023, 08:46:37 pm ---I know the relations.
However the generated code is not accepted with the scope.
I think the cause is for the incorrect length of option mask or similar problem which I have experienced for TDS5034B.

Do you have any examples of option code for TDS6254C?

--- End quote ---

In the past I created working Option Keys for a real DPO7254, DPO72004 and TDS7404B. To enable all possible Options I experienced then that the string for a TDS7404B can be shorter than those for the DPO7254 and DPO72004 and observed slight UID differences between DSA and DPO Models. I don't know how to create "officially" correct Keys. You are invited :)

Calibrationfixture

Navigation

[0] Message Index

[#] Next page

[*] Previous page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod