« previous next »
Pages: [1]   Go Down

Author Topic: tektronix TPS2000 BNC replacement kit  (Read 856 times)

0 Members and 1 Guest are viewing this topic.

Online hitecelecTopic starter

  • Regular Contributor
  • *
  • Posts: 95
  • Country: in
tektronix TPS2000 BNC replacement kit
« on: September 28, 2020, 06:40:35 am »
Hi All

looking for tektronix 050-3598-00 bnc replacement kit for TPS 2000 SCope . as it is discontinued not available
Any alternate solution ?

Thanks in advance
Logged
 

Offline Ground_Loop

  • Frequent Contributor
  • **
  • Posts: 668
  • Country: us
Re: tektronix TPS2000 BNC replacement kit
« Reply #1 on: September 30, 2020, 02:22:37 am »
Do you know if it is the same as used in tds210/20.  If so, I have a handful

Edit: I just saw a picture of the acquisition board and they don't look the same.
« Last Edit: September 30, 2020, 02:26:33 am by Ground_Loop »
Logged
There's no point getting old if you don't have stories.
 

Offline bdunham7

  • Super Contributor
  • ***
  • Posts: 8038
  • Country: us
Re: tektronix TPS2000 BNC replacement kit
« Reply #2 on: September 30, 2020, 03:40:40 am »
I believe the insulated shells may be the same as in the kit for the TPS2000B series, 050374800.  I have not been able to confirm that yet.  I've been putting off buying a set so if they are now unobtanium, that's not good.
Logged
A 3.5 digit 4.5 digit 5 digit 5.5 digit 6.5 digit 7.5 digit DMM is good enough for most people.
 

Online hitecelecTopic starter

  • Regular Contributor
  • *
  • Posts: 95
  • Country: in
Re: tektronix TPS2000 BNC replacement kit
« Reply #3 on: October 22, 2020, 06:19:16 am »
thanks

no. they are insulated.

Logged
 
Pages: [1]   Go Up
« previous next »

Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf

 


EEVblog Main Site EEVblog on Youtube EEVblog on Twitter EEVblog on Facebook EEVblog on Odysee