« previous next »
Pages: [1]   Go Down

Author Topic: HP3325B Fail 139  (Read 419 times)

0 Members and 1 Guest are viewing this topic.

Offline Greg272Topic starter

  • Newbie
  • Posts: 2
  • Country: pl
HP3325B Fail 139
« on: November 21, 2024, 01:29:15 pm »
Hello, I wanted to welcome all users of HP measuring devices. I also have a request for help in repairing the 3325B generator. The battery was drained after a long downtime, but after replacing the battery, an error occurred during initialization FAIL 139. Does anyone have information about the causes of the error.
Logged
 

Offline Runco990

  • Frequent Contributor
  • **
  • Posts: 284
  • Country: us
Re: HP3325B Fail 139
« Reply #1 on: November 21, 2024, 06:19:52 pm »
You lost all calibration values.  Download the service manual and go through all the special function calibrations. 
Logged
 

Offline Greg272Topic starter

  • Newbie
  • Posts: 2
  • Country: pl
Re: HP3325B Fail 139
« Reply #2 on: November 21, 2024, 11:13:34 pm »
Thank you for the tips, I don't know if everything is OK because Fail 139 is displayed and it does not respond to the keyboard, is it possible to enter some standard values ​​to restore keyboard support?
Logged
 

Offline Runco990

  • Frequent Contributor
  • **
  • Posts: 284
  • Country: us
Re: HP3325B Fail 139
« Reply #3 on: November 23, 2024, 12:01:14 am »
keyboard should work, double check your work.
Logged
 
Pages: [1]   Go Up
« previous next »

Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf

 


EEVblog Main Site EEVblog on Youtube EEVblog on Twitter EEVblog on Facebook EEVblog on Odysee