Author Topic: TL866  (Read 747 times)

0 Members and 1 Guest are viewing this topic.

Offline lionelkjh

  • Regular Contributor
  • *
  • Posts: 171
  • Country: fr
TL866
« on: June 06, 2018, 05:01:02 pm »
Good evening; I'm having a problem with a TL866 programmer. When I install my PIC16F873A (SOIC28) (new); I have an error code displayed, and I can not do anything; neither read nor program it. The support is new, and the direction of the integrated circuit is correct, as well as its legs that touch the contacts correctly. I attach photos. Do you have an idea?? Thank you for you precious help
 

Offline lionelkjh

  • Regular Contributor
  • *
  • Posts: 171
  • Country: fr
Re: TL866
« Reply #1 on: June 06, 2018, 05:01:37 pm »
the following....
 

Offline giosif

  • Frequent Contributor
  • **
  • Posts: 440
  • Country: gb
Re: TL866
« Reply #2 on: June 06, 2018, 05:38:37 pm »
I think that, if you uncheck that "Check ID" option at the bottom of the main MiniPRO app window, it should work.
Give it a try.
 

Offline ElektroQuark

  • Supporter
  • ****
  • Posts: 1220
  • Country: es
    • ElektroQuark
Re: TL866
« Reply #3 on: June 06, 2018, 06:37:52 pm »
The ZIF socket of the TL866 is really bad.
Try opening and closing it with the lever for some times and try again. It could be a bad contact.

Offline coromonadalix

  • Super Contributor
  • ***
  • Posts: 2227
  • Country: ca
Re: TL866
« Reply #4 on: June 07, 2018, 02:26:44 am »
you could upgrade to version 6.71  ??     when i have theses errors  i remove the check id,  make an dump of the ic 2 or 3 times named differently, and reprogram the chip with 1 of those backup, if it still works okay, the tl866 software may have a bug ???

http://www.autoelectric.cn/en/tl866_main.html
 

Offline lionelkjh

  • Regular Contributor
  • *
  • Posts: 171
  • Country: fr
Re: TL866
« Reply #5 on: June 07, 2018, 07:41:45 am »
Hello everyone! I managed to program my PC thanks to you! It had to uncheck the box: "check id". One note however: is it normal not to be able to read the programming inside the ic? (all the boxes indicate 0 when reading)? :phew:
 

Offline shakalnokturn

  • Frequent Contributor
  • **
  • Posts: 876
  • Country: fr
Re: TL866
« Reply #6 on: June 07, 2018, 08:54:00 am »
I guess the code protection is active.
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf