Author Topic: TL866II-PLUS not enough current causing programming issues  (Read 395 times)

0 Members and 1 Guest are viewing this topic.

Offline tonycstechTopic starter

  • Contributor
  • Posts: 40
  • Country: us
TL866II-PLUS not enough current causing programming issues
« on: March 01, 2024, 03:57:26 am »
Programming graphics cards.
Cannot program chip on board.
I suspect not enough current.
Is that something that can be fixed ?

its 50/50. Sometimes i can program but PCB has to be cold, sometimes i cant no matter what until i remove the chip.
« Last Edit: March 01, 2024, 04:59:52 am by tonycstech »
 

Offline JimKnopf

  • Regular Contributor
  • *
  • Posts: 179
  • Country: 00
Re: TL866II-PLUS not enough current causing programming issues
« Reply #1 on: March 05, 2024, 06:46:09 pm »
You could try an USB-Hub with external Powersupply. But maybe it's time to upgrade to a XGecu T56 or RT809H. Both can be powered with an external PSU. Be aware there are T56 clones in the wild without DC Jack.
 

Offline tonycstechTopic starter

  • Contributor
  • Posts: 40
  • Country: us
Re: TL866II-PLUS not enough current causing programming issues
« Reply #2 on: March 05, 2024, 06:55:55 pm »
Where can i buy authentic XGecu T56 ?
Amazon lists few but their prices differ dramatically.
 

Offline JimKnopf

  • Regular Contributor
  • *
  • Posts: 179
  • Country: 00
Re: TL866II-PLUS not enough current causing programming issues
« Reply #3 on: March 05, 2024, 07:11:10 pm »
I bought my one from XGecu official store on Aliexpress. Plain device is around 160 Euro.
 

Online BrokenYugo

  • Super Contributor
  • ***
  • Posts: 1103
  • Country: us
Re: TL866II-PLUS not enough current causing programming issues
« Reply #4 on: March 05, 2024, 07:20:44 pm »
IIRC they also run an amazon store, all legit sources are listed on their site.
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf