Author Topic: TLA-704  (Read 263 times)

0 Members and 1 Guest are viewing this topic.

Offline gearheadgeek

  • Newbie
  • Posts: 3
  • Country: us
  • If its not broken still tear it apart
TLA-704
« on: November 04, 2019, 12:33:11 am »
hello I have a old tektronix TLA-704 logic analyzer. I dug it out of the closet and went to fire it up and of course the CMOS battery is dead and i fixed that and went into the BIOS to reset everything and went to recognize the hard drive and well its dead (clicking and chirping and all the stuff ) and I know it dead. the question is can I use a Tektronix 039-0048-01 Benchtop Controller to reinstall the OS when I get a new hardware. this time Im going with a IED to 'SD card controller. I found a controller on Ebay

                                                                                         thanks in advance  |O
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf