« previous next »
Pages: [1]   Go Down

Author Topic: Help trace what the IC is connected to in a Gossen Metrahit X-TRA / Pro  (Read 750 times)

0 Members and 1 Guest are viewing this topic.

Offline giosifTopic starter

  • Frequent Contributor
  • **
  • Posts: 895
  • Country: gb
Help trace what the IC is connected to in a Gossen Metrahit X-TRA / Pro
« on: December 14, 2020, 08:14:33 pm »
Hi,

Apologies for the duplicate, but I thought I'd ask this explicitly, in case people are not following my other Gossen repair thread: could someone with a Metrahit X-TRA or Pro be so kind to check where the traces for the two IC pins in the green rectangle are going?

Thank you!
« Last Edit: December 14, 2020, 08:16:45 pm by giosif »
Logged
 

Offline giosifTopic starter

  • Frequent Contributor
  • **
  • Posts: 895
  • Country: gb
Re: Help trace what the IC is connected to in a Gossen Metrahit X-TRA / Pro
« Reply #1 on: December 18, 2020, 03:33:50 pm »
Anyone, please?
Logged
 

Offline Florian68

  • Newbie
  • !
  • Posts: 7
  • Country: ro
Re: Help trace what the IC is connected to in a Gossen Metrahit X-TRA / Pro
« Reply #2 on: December 18, 2020, 09:10:46 pm »
Maybe it helps you
Logged
 
The following users thanked this post: giosif

Offline giosifTopic starter

  • Frequent Contributor
  • **
  • Posts: 895
  • Country: gb
Re: Help trace what the IC is connected to in a Gossen Metrahit X-TRA / Pro
« Reply #3 on: December 18, 2020, 09:59:20 pm »
Many thanks!
Ok, so those two pins don't go to the customer ADC IC, but to the unpopulated section on the board (probably populated for a different model).
Logged
 
Pages: [1]   Go Up
« previous next »

Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf

 


EEVblog Main Site EEVblog on Youtube EEVblog on Twitter EEVblog on Facebook EEVblog on Odysee