Author Topic: Trio CS1352 oscilloscope trigger/blanking board photo needed  (Read 337 times)

0 Members and 1 Guest are viewing this topic.

Offline gkmaia

  • Frequent Contributor
  • **
  • Posts: 372
  • Country: nz
  • Electronics Hobbyist
Trio CS1352 oscilloscope trigger/blanking board photo needed
« on: April 20, 2019, 04:53:00 am »
It may be a very long shot. But is there any one with a Trio CS 1352 who could send me a photo of the trigger/blanking board both sides? My board has some weird jumpers that do not match the schematic and  I need to check and not sure if those are factory revision or previous owner fiddling around.
« Last Edit: April 20, 2019, 04:57:28 am by gkmaia »
 

Offline TsungaM

  • Newbie
  • Posts: 2
  • Country: se
Re: Trio CS1352 oscilloscope trigger/blanking board photo needed
« Reply #1 on: April 24, 2019, 08:35:34 pm »
I have one my bench rigt now...

This is my first post on this forum, let's see if I manage to attach the pictures... (and that it's the right board).

Do you, by the way, have a schematic, because I have not. I'm thinking of modifying mine into some cool x/y-display.
 

Offline gkmaia

  • Frequent Contributor
  • **
  • Posts: 372
  • Country: nz
  • Electronics Hobbyist
Re: Trio CS1352 oscilloscope trigger/blanking board photo needed
« Reply #2 on: April 24, 2019, 10:01:15 pm »
WOW! That is super helpful. I have the schematics. Please send me yuo email on a private message and I will email that to you.

Thanks!!!!
 

Offline TsungaM

  • Newbie
  • Posts: 2
  • Country: se
Re: Trio CS1352 oscilloscope trigger/blanking board photo needed
« Reply #3 on: April 25, 2019, 10:31:59 am »
Great! If you need any other pictures or more detailed I can give it a try. I'll send you a pm with my email.
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf