« previous next »
Pages: [1]   Go Down

Author Topic: How to replace resistive humidity sensor on weather station  (Read 1040 times)

0 Members and 1 Guest are viewing this topic.

Offline duzycinekTopic starter

  • Contributor
  • Posts: 42
  • Country: pl
How to replace resistive humidity sensor on weather station
« on: November 05, 2022, 04:01:50 pm »
Hello, I got problem how to decide which humidity sensor should I buy for replacement in my weather station transmitter. I got N25FR wireless 433mhz weather station model WH1050 and it has resistive humidity sensor inside, which is faulty. It measures about 12-15% air humidity all the time. I was searching for replacement but noticed that almost every sensor is powered by VAC. After few measurments it seems my sensor is powered by 3VDC(2 AA series battery). Anyone have experience with stations like this and could advice which sensor replacement should I buy? Adding photos of sensor with module and measurments with osciloscope on both legs of sensor.
Logged
 

Offline TheMG

  • Frequent Contributor
  • **
  • Posts: 867
  • Country: ca
Re: How to replace resistive humidity sensor on weather station
« Reply #1 on: November 05, 2022, 10:46:51 pm »
Looks like a bog standard HR31/HR202 type sensor or similar.

By the way, it's capacitive not resistive.
Logged
 
The following users thanked this post: duzycinek

Offline duzycinekTopic starter

  • Contributor
  • Posts: 42
  • Country: pl
Re: How to replace resistive humidity sensor on weather station
« Reply #2 on: November 06, 2022, 08:28:56 am »
Yes, I noticed it also, but the problem is that these sensors should be powered with AC. It is not problem on this case? They also works with DC?

Quote from: TheMG on November 05, 2022, 10:46:51 pm
By the way, it's capacitive not resistive.
Yes, sorry, my bad.
Logged
 

Offline duzycinekTopic starter

  • Contributor
  • Posts: 42
  • Country: pl
Re: How to replace resistive humidity sensor on weather station
« Reply #3 on: December 12, 2022, 12:58:52 pm »
Hello, if anyone was interested, it seems that is HR31 sensor. Readings are almost same as orginal one.
Logged
 
The following users thanked this post: fzabkar

Offline testpoint1

  • Frequent Contributor
  • **
  • Posts: 411
  • Country: us
Re: How to replace resistive humidity sensor on weather station
« Reply #4 on: December 15, 2022, 05:26:52 am »
it is HR202L, 100% is resistance sensor, capacitor is different, I have much more in hand, if you in US, free one for you.
Logged
 
The following users thanked this post: duzycinek

Offline duzycinekTopic starter

  • Contributor
  • Posts: 42
  • Country: pl
Re: How to replace resistive humidity sensor on weather station
« Reply #5 on: December 15, 2022, 10:46:49 pm »
Thank you, sadly I am from europe :P
Logged
 
Pages: [1]   Go Up
« previous next »

Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf

 


EEVblog Main Site EEVblog on Youtube EEVblog on Twitter EEVblog on Facebook EEVblog on Odysee