uCurrent repair

[embedded_tom]

A momentary loss of common sense caused the 10 ohm/0.05% resistor (R9) to fry in my uCurrent. (I was measuring a 3-cell battery pack by breaking the pack in the middle, and forgot to disconnect my scope when I reconnected the USB communication module. Dammit.)

Before I order a Digikey replacement, I was wondering if anyone had the full specs for that part?

Thanks.

Tom

[miguelvp]

Here is Dave's BOM:

http://www.eevblog.com/files/uCurrent-BOM-Rev5-Public.pdf

From here:

http://www.eevblog.com/projects/ucurrent/