Electronics > Repair
Unknown Part in my Fluke 200 LAN Toner
(1/2) > >>
Glenn:
Hi Guys!

I've got a second one of these Toner Tools were this Part has been knocked of by the Coax Connector above when i dropped it.
I'm searching for the 3 legged Part labeled 6.00M. The Mask says U301, so it might be a VoltageDivider?

I've got no clue what to search for!

Can somebody help me?
fzabkar:
What are the markings on the adjacent 14-pin IC? My first thought is that 6.00M is a 6MHz oscillator, but I've never seen one in a 6-pin package.
squadchannel:
Crystal resonator. :-+

https://www.digikey.com/en/products/detail/ecs-inc/ECS-SR1-6-00-B-TR/332500
DimitriP:

This close to a connector ....I'd guess diode array for esd protection 
BennoG:
my guess a 6.00Mhz clock generator.
Benno
Navigation
Message Index
Next page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod