« previous next »
Pages: [1]   Go Down

Author Topic: Very Noisy Kikusui PLZ152WA Electronic Load  (Read 900 times)

0 Members and 1 Guest are viewing this topic.

Offline sampler1Topic starter

  • Regular Contributor
  • *
  • Posts: 80
  • Country: ca
Very Noisy Kikusui PLZ152WA Electronic Load
« on: July 10, 2021, 01:35:18 am »

I am about to ditch my Kikusui PLZ152WA Electronic Load. It is so noisy !
It works well but it's driving me crazy. I thought I would throw this out there and maybe someone might have a solution before I ditch it.

Regards to all!
Logged
“Electronic devices are powered by white smoke. When smoke goes out, device is dead.”
 

Offline Jester

  • Frequent Contributor
  • **
  • Posts: 890
  • Country: ca
Re: Very Noisy Kikusui PLZ152WA Electronic Load
« Reply #1 on: July 10, 2021, 01:52:06 am »
If you mean audible noise, just change the fan.
Logged
 

Offline sampler1Topic starter

  • Regular Contributor
  • *
  • Posts: 80
  • Country: ca
Re: Very Noisy Kikusui PLZ152WA Electronic Load
« Reply #2 on: July 15, 2021, 01:00:11 am »
I actually decided to replace the 100V fan with a 12VDC Fan and a Temp speed controller. Also incorporated a small 12 volt DC supply.
Super Quiet now.

Regards to all the people who never bother to help out.  :-DD
Logged
“Electronic devices are powered by white smoke. When smoke goes out, device is dead.”
 

Offline glano

  • Newbie
  • Posts: 4
Re: Very Noisy Kikusui PLZ152WA Electronic Load
« Reply #3 on: May 12, 2023, 08:14:12 pm »
I have a Kikisui PWR401ML PSU with a loud fan.

I haven't taken it apart yet to see but wondered if you had any more details on your fix, e.g. parts used, integration, etc.

Thanks!
Logged
 
Pages: [1]   Go Up
« previous next »

Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf

 


EEVblog Main Site EEVblog on Youtube EEVblog on Twitter EEVblog on Facebook EEVblog on Odysee