Author Topic: Voltcraft CPPS-160-42/Manson SSP-8160 power supply repair firmware  (Read 175 times)

0 Members and 1 Guest are viewing this topic.

Offline Pluscrafter

  • Regular Contributor
  • *
  • Posts: 71
  • Country: ch
  • Somewere on earth
I've bought an defect Voltcraft CPPS-160-42 for 20Fr. and found out that the microcontroller of the frontend is shorted/destroyed. It is a NXP LPC2132FBD64. Is there any chance to repair and get the hex file for that chip? Or could I get the frontend board from somewhere? It's the same power supply like the
Manson SSP 8160 https://www.reichelt.de/labornetzgeraet-0-42-v-0-10-a-stabilisiert-programmierbar-ssp-8160-p142094.html?&trstct=pol_1
Original Voltcraft CPPS-160-42 https://www.conrad.de/de/p/voltcraft-cpps-160-42-labornetzgeraet-einstellbar-0-02-42-v-dc-0-01-10-a-160-w-usb-fernsteuerbar-programmierbar-a-1182100.html
« Last Edit: December 11, 2019, 09:39:32 pm by Pluscrafter »
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf