| Electronics > Repair |
| What more i can do? |
| << < (71/112) > >> |
| Poroit:
Has this Topic been taken down by the Moderator? I can only find it if I search. |
| Harry_22:
No, it was moved here entirely. Have a look in Repair thread. |
| Harry_22:
Another idea came to me. You can try the effect of temperature on the board. I foresee that a manual reset button has already been installed. Gradually heating different parts of the board by hot air gun, periodically press reset and watch the reaction. Only without fanaticism. Don't overheat. Old components are more delicate. |
| 222Lab_Test222:
--- Quote from: Poroit on November 29, 2024, 03:23:07 am --- Can you send some pics of the Interface between the Controller and the Hydraulic package. --- End quote --- To be honest, i do not know how to control them or the connection between them, I only have the Controller and motherboard, I only know it is connect to the machine BUT how is it connect where is it connected no idea. |
| 222Lab_Test222:
--- Quote from: Harry_22 on November 29, 2024, 04:27:27 am ---Another idea came to me. You can try the effect of temperature on the board. I foresee that a manual reset button has already been installed. Gradually heating different parts of the board by hot air gun, periodically press reset and watch the reaction. Only without fanaticism. Don't overheat. Old components are more delicate. --- End quote --- I did heat with around 300 degree, and tried pressing reset button, I did not see any changed from naked eye, After a while i stop as board started to get more heat. |
| Navigation |
| Message Index |
| Next page |
| Previous page |