Electronics > Repair
What precaution to solder those tiny gauge ? how to ?
<< < (7/10) > >>
repairs:
I will attempt it,
let me know if it worked
thanks

wich option should i select if not inline  , from memory there is 4 options or something like that.
tooki:

--- Quote from: repairs on January 12, 2025, 02:10:32 am ---I will attempt it,
let me know if it worked
thanks

wich option should i select if not inline  , from memory there is 4 options or something like that.

--- End quote ---
You did the opposite of what was needed: you deleted the attachments, but left the tags in the text. You needed to delete the tags, but leave the attachments. Now the images are gone entirely.

The default setting “end-of-post expandable thumbnail” is what you want 99% of the time. It gives the result shown in my post with the screenshot.
repairs:
Hi what do you mean by tag?

i tried pasting them back this time with end of post mention  instead of inline.
How is that?
They look as big as the first time to me.
repairs:

--- Quote from: tooki on January 12, 2025, 10:33:52 am ---
--- Quote from: repairs on January 12, 2025, 02:10:32 am ---I will attempt it,
let me know if it worked
thanks

wich option should i select if not inline  , from memory there is 4 options or something like that.

--- End quote ---
You did the opposite of what was needed: you deleted the attachments, but left the tags in the text. You needed to delete the tags, but leave the attachments. Now the images are gone entirely.

The default setting “end-of-post expandable thumbnail” is what you want 99% of the time. It gives the result shown in my post with the screenshot.

--- End quote ---
Hi I am surprised not to see any reply . Is it because of my poor english of management of the pictures?
I will try something that might solve the situtation: I will modify the picture way with 4 or 5 different attachement and hopefully someone will tell me wich one of the attachement way  works best for seing you without having to figgle fart with the scolling left and right up and down and once i will know the prefered method i will apply it to the 4 pictures i want to show you?

 Is that a reasonable approch? Sorry, I am not very computer oriented, i try my best
repairs:
HI everyone.

I went forward with the first solution.
quality of pic not so good i know.

On PIcture 3
Now i found what seems to be an  used wire yellow color coming from the cable. It was clean cut and had nowhere to go to nor any other yellow cable loose to join. Is that something that happens to have wires not used or l should investigate what the yellow color is supposed to controle and keep an eye on the task or at least be aware.?

It there a way to use a multimeter to test if it has current going inside itself?

I found some black heat shrink a bit kind of thick and added 1 inch and then anoth 20250111_162047.jpg (2028.19 kB. 2160x2160 - viewed 15 times.) 20250111_134909.jpger 2.5 inches . It goes over the gromet kind of nicely . For now that is the solution even though i ordered a new gromet in case i have to reopen the thing, hopefully not.
Navigation
Message Index
Next page
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod