Electronics > Repair
Xantrex/Sorensen/Ametek XPR series service manual?
(1/2) > >>
Ingineer:
I have a Xantrex branded XPR 300-20.

All I can find online is a operating manual.  Anybody know of a service manual/schematic?

It's got  the HV option, so designed for 480v input, but they have same model designed for 240v, I'm wondering if there is way to convert it back to the LV option?

Thanks!
coromonadalix:
ko4bb.com  has lots of xantrex but not your series, but sometimes they have lots of similarities ...
Ingineer:
Thanks, Yeah I found the operating manual there.  He doesn't have the service manual.  I considered looking at other series, but not sure it would be helpful, I guess if I strike out elsewhere, I'll try that.

Really annoying they don't publish the service manuals for pro gear like this, I know this is what the world is coming to.

I'm old enough to remember some consumer gear CAME with a schematic tucked inside!  I remember some GE TV sets had a little plastic cover that had it right on the back!
coromonadalix:
i would say the opposite, we are lucky they have leaked to the net ....    and they have the right to protect their IP  ....
Ingineer:
Protect their IP?    For end-of-life older equipment, it's unlikely there is any trade secrets to be protected.   If I was in management, I would make EOL'd service manuals freely available, it creates good will, and enhances the reputation.  If I know a vendor does this, I'm way more likely to buy new equipment from them in the future.

Now it almost seems like most vendors are in such a hurry to ship, they sometimes put out unfinished products, (Especially where software is concerned) and then you are on your own.  Sad!
Navigation
Message Index
Next page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod