Electronics > Repair
[Solved] xbox one s unable to generate 3.3v stby, bst mystery via help
(1/1)
haxorflakes:
there is a mysterious via that comes off of the 3.3v_stby chip that is not listed anywhere on the Schematics i have for it, and the chip is unable to generate a proper 3.3v on the bootstrap pin. i have removed the resistor R4C20 to see if there was something bringing the BST pin down, but i cant figure it out. there is no direct short to ground, and yet i am unable to get a proper bootstrap voltage coming off.

with the resistor in place i was measuring .5v and with it missing i am getting 1v. the other curious thing, is when i try to measure from the pad of the resistor, i don't get any voltage except like 5mv, but measuring direct at the pin i get 1v. i did check for continuity between the pin and the resistor pad and i get continuity. so something is def weird there.

anyone can help me determine where this via goes and why i am getting funky readings?

Edit: Reflowing the chip has now made it generate the proper voltage
Navigation
Message Index
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod