| Electronics > Repair |
| Yokogawa 7555 front current post/fuse holder needed |
| (1/1) |
| Ordinaryman1971:
Hi everyone, I'm looking for a source of the fuse holder/post for current measurements for the front of the 7555 Yokogawa meter. I believe it could be different model, I've checked 7562 and it fits as well. Maybe somebody has a broken meter and would be willing to sell the part or sell a whole meter... |
| Ordinaryman1971:
I was thinking maybe somebody could 3d print it? |
| Stray Electron:
I've seen something similar used on an HP meter. Possibly the HP 3468. I wonder if it's the same part used for both meters, or possibly made that meter for Yokogawa? |
| Ordinaryman1971:
Checked 3468, that’s not the one, but it may be some idea taking in consideration close cooperation between Yokogawa and HP. |
| Ordinaryman1971:
I've got 10 of those fuse holders straight from Yokogawa thanks to kindness of one of the contributors on this forum. Big thanks and of course I've got extras so I could share in case somebody needs one... or two. |
| Navigation |
| Message Index |