Inexpensive "open barrel" crimp tool

[wblock]

Can someone recommend an inexpensive "open barrel" crimp tool?  These are pins like the Molex connector pins in PC power supplies, however, I want to crimp up to 10AWG wire.  Here is an example of that type of pin from Digikey: http://www.digikey.com/product-detail/en/62428-2/A100768CT-ND/2233444.  Digikey has production tools that start at around $400.  I just want something for occasional use, hopefully for a tenth of that or so.  Changeable dies would be good.  Any suggestions?

[cs.dk]

Something like this should do - They are not to expensive; http://www.knipex.com/index.php?id=1216&L=1&page=art_detail&parentID=1299&groupID=1318&artID=3774

[wblock]

Nice, but unfortunately only good for up to 13AWG.

Meanwhile, I've done more searching, and located these: http://www.amazon.com/FindyouLED-LS-2546B-Crimping-2-5-6mm2-Connector/dp/B00KFUW3LY.  Adequate reviews, replaceable dies, and available from multiple sellers on ebay for around $22.  Worth a risk, maybe.

[Halvmand]

Nice, but unfortunately only good for up to 13AWG.

Meanwhile, I've done more searching, and located these: http://www.amazon.com/FindyouLED-LS-2546B-Crimping-2-5-6mm2-Connector/dp/B00KFUW3LY.  Adequate reviews, replaceable dies, and available from multiple sellers on ebay for around $22.  Worth a risk, maybe.

I've used both, and the one you've linked to is the one i prefer. To my best knowledge it crimps to perfection every time. In my opinion the other one is hopeless for all but cutting small screws to lenght.

[wblock]

I've used both, and the one you've linked to is the one i prefer. To my best knowledge it crimps to perfection every time.

Excellent.  Have you found or tried other dies with it?

[Phiveaces]

I just bought myself one of these:

http://www.aliexpress.com/item/Terminal-Combination-crimping-tool-set-with-4-replaceable-die-sets-LS03C-5D3-crimping-tool-kit/826941462.html

still waiting for it in the mail, but I have a similar one with just one die.

Best part of this is you can pick which 5 die sets they send with the tool... and the nice case.... and extra dies are fairly cheap

[Halvmand]

No i've only used the dies that was on from the start.