Author Topic: MAHA MH-C800S Charger teardown  (Read 12323 times)

0 Members and 1 Guest are viewing this topic.

Offline saturation

  • Super Contributor
  • ***
  • Posts: 4788
  • Country: us
  • Doveryai, no proveryai
    • NIST
Re: MAHA MH-C800S Charger teardown
« Reply #25 on: July 02, 2014, 08:36:59 pm »
dunkemhigh, thanks for providing added details; those are very concerning thermographs.

I don't think such evidence has been shown in most any Internet site for this charger.  I wouldn't expect cells to reach that temperature without triggering the thermal sensor, now I see I am in error.    If the charger you have is not faulty, then the Maha C9000 as designed cannot pick up a potentially dangerous condition.  Even if the cells you used were faulty, the Maha should have shut down by now. 



These are after some time left on charge, not after a short while warming up. All I can say is that they are not the results I'd expect from reading your post.
Best Wishes,

 Saturation
 

Offline dunkemhigh

  • Super Contributor
  • ***
  • Posts: 1632
Re: MAHA MH-C800S Charger teardown
« Reply #26 on: July 02, 2014, 09:35:13 pm »
Quote
Even if the cells you used were faulty, the Maha should have shut down by now.

Indeed, that was my concern when contacting support. Their response was somewhat disappointing (in acknowledging that the charger isn't faulty) but I am at least aware of it now.
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf