Products > Other Equipment & Products

Any opinions on the i2c PDK1200 ?

(1/4) > >>

Pooya:
This station seems to be new and it looks like it actually supports all three handles T210 T115 T245.
It also allows for two handles to be used simultaneously.

I found the station here:

https://www.aliexpress.com/item/1005006024192596.html?spm=a2g0o.productlist.main.21.45e87a43ZcNUPp&algo_pvid=292793fd-14d6-4faa-899b-3fa337212a82&algo_exp_id=292793fd-14d6-4faa-899b-3fa337212a82-10&pdp_npi=4%40dis%21EUR%21315.70%21220.99%21%21%21330.82%21%21%40211b81b116993054606376306e21b7%2112000035370251111%21sea%21DE%213243379258%21&curPageLogUid=tWwSOWE0PXnS


https://i2c123.com/en/product/pdk1200/

Is it better than Aixun T420D? 

ndarjo21:
If you have much money, you can be the one who review it. Watch this, to know what kind brand it is
https://youtu.be/RsEg3Hu4b2k?si=bKTSNiNEETFtcsik

ndarjo21:
I wait for your review then

Pooya:
New Video, Unboxing, Disassembly

https://www.youtube.com/embed/NjcCmb7Ndzk?si=BkWeENowSiwTb324

Pooya:
Today I received my PDK1200 soldering station,
I confirm that this station is 100% compatible with JBC T245, T210, NT115(socket has to be changed) and JBC genuine cradles.
I'm using JBC T245 handle with JBC AD-SF Cradle + Stock PDK1200 Cradle with Aixun T115 handle and I recommend if you can afford JBC tip and handle get this station and use it.
In my opinion this station is way more worth than Aixun 420D. It's half the cost and the quality is right there.
No body on entire internet at least English web sites talked about this station. I'm very happy with that.

Navigation

[0] Message Index

[#] Next page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod