Author Topic: APC SURT1000XLI - teardown  (Read 4106 times)

0 Members and 1 Guest are viewing this topic.

Offline hacklordsniperTopic starter

  • Frequent Contributor
  • **
  • Posts: 574
  • Country: hr
  • Don't turn it on, take it apart!
    • HackLordSniper
APC SURT1000XLI - teardown
« on: September 28, 2011, 05:04:00 pm »
So the first one arrived. I was surprised when removing the batteries it was still pretty heavy (it has 27 Kg, so its not a usual carry as you wish UPS  :) )

Batteries are consisted of 4X12V 7.2 Ah in series. It has 2 fans, one is blowing the air in the heatsink and on the other side second fan is pulling that air out.

I'm surprised how silent it is. A Viewsonic VOT120 nettop computer running on minimal fan speed is still significantly louder. Did not have chance to test it toughly, will do that when i move in.

Its not fancy with a LCD like cheaper alternatives but simple and elegant row of leds does the job. However the only bad thing is you get only 2 power cables and you don't get the line power cable  :(

Enjoy  :)
« Last Edit: September 28, 2011, 05:05:56 pm by hacklordsniper »
Oh, the joy of sending various electronics to silicon heaven
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf